ADVERTISING

$1936

was donated
ADVERTISING

(( Bracelets )) Beautiful NEW pattern

Table of contents
1 - Step 1 ۞ Make Clip
2 -
Step 2 ۞ Arrange Colors
3 -
Step 3 ۞ Soul String
4 -
Step 4 ۞ Horizontal Lines
5 -
Step 5 ۞ Going Crazy

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬


▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬


This kind of bracelet is made with the normal pattern knot but in reverse, soon you will see what i'm talking about ... is very simple to do and you can create countless shapes and designs with this.



Step 1 ۞ Make Clip



Make Clip
We will make the clip before starting the bracelet.
For this we must cut 5 threads of a size of approximately 1.20 mts. (I'm using ocher, pink, orange, yellow and sky blue)
After that we bend the strings to find the half and when we find it we will make a knot.
Then we begin to make a braid about 2 or 3 cm from the knot and close it. After that close the opposite side too.

۞ check image ۞




REMEMBER to arrange the colors of the bracelet before starting the braid.


Step 2 ۞ Arrange Colors



Arrange Colors
When we have the clip ready, arrange the colors of the bracelet again, these colors must be ordered as mirrors.
Now that we are ready we will start with the Normal Knot in reverse.

۞ check image ۞



Step 3 ۞ Soul String



The Soul String
First we must know that there is a soul string and there are others that are rolled over it.
This soul-string sets the direction and this is exactly with what we'll play.
We begin the design of the bracelet with two horizontal lines. We will use one outer string as a soul string. In my case is the sky-blue string.
This string should be placed above the other strings all the time (talking about the soul string)

۞ check image ۞




We need to REMEMBER to give direccion (horizontal) with the soul string while we are rolling the other ones.


Step 4 ۞ Horizontal Lines



Horizontal Lines
We begin by placing the soul string over the other ones.
Then we roll up the first string (yellow) on the soul string (sky blue).

۞ check image ۞



We need to make the steps 6 and 7 two times with each string to make 1 knot, and we need to reach the other sky blue string to finish this step.
۞ check image ۞



REMEMBER to give direccion with the soul string, try not to move it and keep it stretched
Once we've finished we will grab the soul string and well try to get it back to the other extreme to make the second horizontal line.

۞ check image ۞



Step 5 ۞ Going Crazy



Going Crazy
Ok... now that we have the 2 horizontal lines we are ready for the REAL pattern, we will work as we talked before with soul strings. For this pattern we will have two soul strings, the soul strings will be the sky-blue ones, and with them we will make diagonal lines insted of horizontal lines.
۞ check image ۞



We need to give a diagonal direction with the soul string first and then roll over the other ones.
REMEMBER you need to make step 15 and 16 two times to get the step 17 done.




We will roll 4 strings over the soul string, the yellow, the orange, the pink and the ocher one. Once we get to the middle we'll repeat the process on the opposite side.




NOTE that the sky blue strings once they are in the middle they dont roll over each other

When we finish rolling the 4 strings we'll switch the color of the soul strings... now they will be the yellow ones.

۞ check image ۞



We will roll then the orange, pink, ocher and sky blue over the yellow soul strings. we would do this on both sides.
When we finish with the yellow strings we will have them in the middle, we will grab only one of them as the soul string and we will roll the second yellow string over it.

۞ check image ۞




Going Crazy 2
To continue the pattern we will grab the two yellow strings in the middle as soul strings again, but this time the diagonal lines will go to the outside.
۞ check image ۞



After we finish with the yellow soul strings, we will switch again to the sky-blue ones, and we will make the second diagonal line going to the outside as well.
We will do this process on both sides, and this will be the result.

۞ check image ۞



You only have to repeat ALL these steps over again, starting from the 2 horizontal lines, and then you'll get something like this.
۞ check image ۞



You can also play, not only with different colors, but with different amount of strings, horizontal or diagonal lines.
Once you've finish you can make two braids to close the bracelet.

FINAL RESULT CAN BE SEEN HERE - NORMAL PATTERN IN REVERSE BRACELET PHOTO

If someone knows the name of these knot please let me know, because i'll be making more tutorials of bracelets using this type of knot and i dunno the name, all i know is that if you turn arround the bracelet when you're done you'll see the common ''NORMAL PATTERN''



▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬


▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ஜ۩۞۩ஜ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Editors

The original author of this tutorial is Chystie .

Uploaded photos

There is no photo for this tutorial yet. Click here to upload photos of your work!

Moderator comments Show comments