(( Bracelets )) Eternity Bracelet
Introduction
This is a very easy bracelet for those of you who know how to tie a candy stripe and chevron.
Materials and Set Up
You need 8 strings of 4 colors, 2 of each color. Begin your bracelet anyway you want, and arrange them so they are next to their matching color.
Step by Step
Step 1
You are going to start knotting a chevron, but do NOT tie the middle together.
Step 2
Keep knotting it like two sparate candy stripes ( I shall refer to them as the right and left columns) until you have four rows on each section.
Step 3
Take the most inward string from the left side and forward knot it to the right inward most string.
Step 4
Continue to knot it all the way to the outside.
Step 5
Tie the other middle string to the left all the way to the outside.
Step 6
Repeat steps 3 and 4.
Step 7
Take the outside string of the left column and tie it inward. Do with both strings of the same color. Repeat with the right column.
Step 8
Tie the outside strings ones inward again. Make sure you remember not to tie them to the other collumn.
Step 9
Repeat steps 3-8 until you have the bracelet as long as needed.
______________________________________________________________________________________
2-Color Variation
by SomayehMaterials and Set Up
Made with 2 different colors (2 of 70" long, 2 of 32" long) arranged:
1L, 1L, 1L, 1L, 2R, 2R, 2R, 2R.
Threads should be prepared in the usual way -- folded in half.
The middle threads, '1L, 1L, 2R, 2R' will be the longer ones, after Step 1 they will be the only ones used.
Step by Step
Step 1
Left side: Make 3 forward knots, 4 times.
Right side: Make 3 backward knots, 4 times.
Step 2
In the middle, make forward knot to join both sides.
Step 3
Left side: Make 3 backward knots.
Right side: Make 3 forward knots.
Step 4
Repeat #2 and #3.
Step 5
Left side: Make 3 forward knots.
Right side: Make 3 backward knots.
Step 6
Repeat #5.
Step 7
Repeat from #2 for pattern.
Editors
The original author of this tutorial is LizzardBeth04 .
Moderator comments Show comments