(( Bracelets )) Braided leaves
| Table of contents |
|---|
| 1 - Introduction 2 - Materials and Set Up 3 - Step by Step 3.0 - Step 1 3.1 - Step 2 3.2 - Step 3 3.3 - Step 4 3.4 - Step 5 3.5 - Step 6 3.6 - Step 7 3 - Videos |
Introduction
This is basically the leaves friendship bracelet except instead of the chevron, it's going to be using the braid pattern.
Materials and Set Up
You will need 12 strings 4 strands for each color. Set up your strings like you would for a normal braid bracelet (1,2,1,2,1,2,1,2,3,3,3,3) shown in the picture below.
pic1
Step by Step
Step 1
[p]Ignore the third color strings for now and do forward knots with all the string pairs 1 and 2.
pic2
Step 2
[p]Pull up the first and last string out of the first row of the forward knots you have done (2,1). Then do another row of forward knots with the next set of string pairs (1,2). Then pull the first and last string UP again. There should only be 4 strings left (1,2,1,2).
Pic3
Step 3
Do forward knots again with those pairs and pull the strings up.
Pic4
Step 4
Do the last knot with the last pair of strings. After that, do backward knots with the closest string 3 across all of the string 1s.
Pic5
Step 5
Do the same thing with the rest of the string 3s starting with the innermost strings.
Pic6
Step 6
Do forward knots with the string 2s on to the string 3s starting with the innermost strings.
Pic7
Step 7
Do step 5 starting from; After that, through step 7 until your bracelet can fit you (or anybody else).
Pic8
Videos
Editors
The original author of this tutorial is piggyfan2 .
Moderator comments Show comments